mcp server

QueueSim

Run M/M/c queue simulations and four scenarios (call center, ER, coffee shop, single server).

Description as published by the maintainer. Source

• version 1.0.0
• archived

archived — The linked repository returns 404. It was deleted, renamed or made private.

What this server can do

11 functions, named and described by the server itself. Parameter names are shown because they say more about what a function does than its name usually does.

compare_analytical_vs_simulated(servers, arrivalRate, serviceRate, simulationDays)

Run the same M/M/c configuration through BOTH the closed-form Erlang-C formula AND the discrete-event simulator, returning a side-by-side comparison with deltas. Use this when the user is validating QueueSim's engine against textbook values, learning queueing theory by watching simulation converge on the formula, or auditing a result that 'feels off' — agreement within ~5%% is the canonical sanity check for an M/M/c run. Pure-Exponential M/M/c only; the closed-form Erlang-C is undefined for other service distributions. Large deltas usually mean the simulation run was too short for steady-state — raise simulationDays. ANTI-FABRICATION: both sides come from real computation — closed-form is deterministic, simulation is stochastic but engine-backed. Quote both verbatim. Do not synthesize an 'average of the two' or recompute the formula from training-data recall. Required: arrivalRate, serviceRate, servers.

compare_separate_vs_pooled(servers, arrivalRate, serviceRate, simulationDays)

Run the classic operations-research teaching demo: pooled queueing (one shared queue, c servers) vs separate queues (c independent queues, one server each, λ/c traffic to each). Both runs have identical total capacity (c × μ) and identical total arrivals (λ), so the offered load ρ is the same; the only structural difference is whether arrivals share a queue or split into c isolated streams. The pooled configuration ALWAYS produces shorter waits — that's the whole teaching point. Use this when the user asks 'should we pool our resources?' / 'should we cross-train?' / 'why do banks have one line instead of c?' / 'what's the cost of siloing my call center into specialist queues?'. Returns both runs side by side with the pooled-vs-separate wait delta. ANTI-FABRICATION: numbers come from two real DES runs. Quote them VERBATIM. Required: arrivalRate, serviceRate, servers.

describe_scenario(name)

Return full details for one preset scenario: title, description, teaching note, peak parameters, and per-hour arrival + staffing arrays. Use this before simulate_scenario to understand the default shape and what overrides make sense. Required: name.

explain_advanced_patterns

Return a textbook-level description of six queueing complexity patterns beyond basic M/M/c: abandonment/reneging, priority tiers, overflow routing, skills-based routing, compound service, and server outages. Use this when the user describes real-world complexity (customers hanging up, VIP queues, specialist escalation, agent breaks, transfers) that plain M/M/c doesn't model. The tool frames each pattern conceptually and points users at ChiAha for custom modeling.

explain_queueing_theory

Return a ~500-word educational explainer of M/M/c queueing theory: Little's Law, utilization, why averages mislead, how simulation relates to Erlang-C. No inputs. Use this when the user asks a conceptual 'why' or 'how does this work' question rather than asking for a number.

interpret_result(servers, arrivalRate, serviceRate, observedAvgWaitMinutes)

Given an M/M/c configuration (arrivalRate, serviceRate, servers) and optionally an observed average wait, returns a queueing-theory framed interpretation: where you sit on the utilization curve, what ρ means in plain language, what one more or fewer server would qualitatively do, and which complexity factors (priority, abandonment, skills routing) might be hiding in real data the M/M/c model can't see. Use this to TEACH while answering — when the user wants context around a number, not just the number itself. Pure text computation, no simulation, no RNG — deterministic output. Required: arrivalRate, serviceRate, servers.

list_scenarios

List the four pre-built QueueSim scenarios. Returns key, title, and one-line description for each (Single Server, Coffee Shop, Grocery Checkout, Call Center). Call this when the user's problem matches one of the preset shapes — use describe_scenario for more detail and simulate_scenario to run one.

recommend_staffing(maxServers, serviceCoV, arrivalRate, serviceRate, simulationDays, arrivalDistribution, serviceDistribution, targetAvgWaitMinutes)

INVERSE of simulate_mmc — given an arrival rate, service rate, and a target average wait time, returns the SMALLEST number of servers needed to meet the target. Use this when the user asks 'how many servers do I need?' / 'what staffing keeps wait under N minutes?'. The tool runs a binary search over candidate server counts (up to maxServers, default 50), invoking the simulator for each candidate. Saves Claude from iterating simulate_mmc 3-5 times by hand. If even maxServers servers can't meet the target, the recommendation is null and the response includes the achieved wait so Claude can explain that the target is infeasible at the given load. ANTI-FABRICATION: `recommendedServers` and `achievedAvgWaitMinutes` come from real DES runs. Quote them VERBATIM. Do not propose a different number you think 'feels right'; this tool already binary-searches for the minimum that meets the target. If the user asks 'what if c=N?' for a specific N, call simulate_mmc with that c. Required: arrivalRate, serviceRate, targetAvgWaitMinutes.

simulate_mmc(servers, serviceCoV, arrivalRate, serviceRate, simulationDays, arrivalDistribution, serviceDistribution)

Run a generic M/M/c queue simulation. Provide an arrival rate (λ, arrivals/hour), a service rate per server (μ, customers/hour each server can finish), and a server count (c). Optional: distribution shapes, service coefficient of variation, run length. Returns per-hour metrics and an overall summary (avg wait, queue length, offered load, throughput). This is the primary tool for 'how many servers do I need?' / 'what's my average wait?' style questions. ALSO preferred over simulate_scenario for what-if questions about scheduled scenarios (Coffee Shop) when the user wants flat uniform numbers — pull the peak params from describe_scenario and run them here. That usually matches user intent better than collapsing a schedule. ANTI-FABRICATION: the returned numbers come from a real discrete-event simulation run. Quote them VERBATIM in your reply. Do not round, estimate, or compute derived figures from training-data recall. If the user asks a follow-up about the same configuration, re-call this tool rather than recalling numbers from earlier in the conversation. Required: arrivalRate, serviceRate, servers.

simulate_scenario(name, overrides)

Run one of the four preset scenarios (single, coffee, grocery, callcenter) with optional overrides. Overrides apply UNIFORMLY across open hours — e.g. setting servers=5 on 'coffee' replaces the 4/6/4 staffing pattern with a flat 5 during open hours (closed hours stay at zero). Use this for (a) faithful reproduction of a scenario's defaults, or (b) uniform scaling (everywhere it was open, use these new numbers). Do NOT use this when the user wants to keep a scheduled scenario's shape but tweak just one part — there's no per-hour override here, and collapsing a 4/6/4 pattern to 5 often isn't what the user meant. For flat what-if analysis on scheduled scenarios, prefer simulate_mmc using peak params from describe_scenario. ANTI-FABRICATION: returned numbers come from a real discrete-event simulation run. Quote them VERBATIM in your reply. Do not round, estimate, or compute derived figures from training-data recall. If the user asks a follow-up about the same scenario+overrides, re-call this tool rather than recalling numbers from earlier in the conversation. Required: name.

simulate_schedule(staffing, serviceCoV, arrivalRates, simulationDays, serviceTimeMinutes, arrivalDistribution, serviceDistribution)

Run a queueing simulation against an arbitrary 24-hour staffing schedule. Take this when the user describes a custom day shape that doesn't match a preset (e.g., 'my coffee shop is open 6am–10pm with 4 baristas off-peak, 7 at the 8am rush, 5 at the 4pm rush'). Inputs: `arrivalRates` (24-element array of customers/hr per hour-of-day) and `staffing` (24-element array of servers/hr); optional uniform `serviceTimeMinutes`. Use 0 in both arrays for closed hours (terminating system). Returns the same per-hour metrics + summary shape as simulate_mmc / simulate_scenario. Stronger fit than simulate_scenario when the user's shape doesn't match the four presets; stronger fit than simulate_mmc when they need per-hour variation. ANTI-FABRICATION: numbers come from a real DES run. Quote them VERBATIM. Do not round, estimate, or derive from training-data recall. Required: arrivalRates, staffing.

Last successful function declaration observed on 2026-08-13. Source: https://queuesim.com/mcp/v1. We list what the server declared; we do not call any of these functions.

Endpoint status observed on 2026-08-13. Source: https://queuesim.com/mcp/v1.

Signals

These are separate measurements of different things. They are deliberately not combined into one score, because a popularity number that mixes website traffic with saves and stars cannot be checked or acted on.

Where to get it

• Repository — https://github.com/chiaha-ai/queuesim-site
• Remote endpoint (streamable-http) — https://queuesim.com/mcp/v1

Also from chiaha-ai

• DiscreteRate — repository gone
  Run DRS demos (Fast-Slow Drain, Hamburger Duo, Valdez Tanker) and explore the paradigm.
• QSimHealth — repository gone
  Healthcare staffing simulator — ED, walk-in clinic, and appointment office DES tools.
• ReliaSim — repository gone
  Reliability and bottleneck simulation for manufacturing lines; run experiments, sweep buffers.
• ReliaStats — repository gone
  Reliability statistics — Weibull/lognormal fitting, MTBF/MTTR, availability, system composition.